1. High magnetization saturation
2. The magnetizing coil comes with a warranty of 100000+/1 year
3. Short magnetization time, easy operation, and wide compatibility range
4. Data such as magnetizing voltage, current, and magnetic flux can be uploaded to the system
project | Technical Specifications | Remarks |
input power | AC220V±5% 50/60Hz | |
input current | ＜ 20A | |
rated power | ＜ 5KW | |
Equipment noise | ≤ 75dB | Excluding instant magnetization |
Compatibility range | Product outer diameter: 20-50mm/50-100mm Iron core height: 20-50mm/50-100mm Product total length: 50-200mm/200-350mm | |
Device color | RAL7035 | |
Aluminum profile groove sealing strip color | Hard black | |
Device dimensions | Approximately 600 × 750 × 1800mm in length, width, and height | |
changeover time | ≤ 20min | Tooling+Coil |
one | Environmental temperature: 0 ℃~40 ℃; |
two | Environmental humidity<80% (no condensation allowed); |
three | Factory height (column top height): 2.5m; |
four | Ground load:>500KG/㎡; |
five | Dimensions of the transportation door for factory equipment: width 1000 x height 2000mm; |
six | Gas source: pressure 0.4-0.6Mpa, flow rate 0.3m 3/ min; |
seven | No dust, no oil fumes, no salt, no dripping water; |
eight | Avoid direct sunlight exposure; |
nine | No flammable or corrosive liquids or gases; |
ten | No impact or high-frequency vibration; |
eleven | Location of use: Workshop open environment. |
