1. Using professionally customized low impedance components
2. Efficient output of magnetizing current, with the shortest current decay time
3. L-type (low impedance) power supply can reduce the heat generation of the magnetizing coil to 1/5 of its original value
|
Project |
PC-2504TPL |
PC-2506TPL |
PC-2510TPL |
Remarks |
|
Input power |
AC220V ± 10% 50Hz single-phase two-wire |
|||
|
Input current |
Max 30A |
|||
|
Rated power |
Max 5KVA |
|||
|
Charging voltage |
100-2500VDC ± 0.2% @ full range The repeatability error is ± 1V@100 ～2500VDC |
|||
|
Output current |
Max 30KA |
|||
|
Capacity |
400uF |
600uF |
1000uF |
|
|
Max output energy |
1250J |
1875J |
3125J |
|
|
Charge and discharge time |
＜ 3S |
|||
|
Communication interface |
RS-485/Ethernet |
|||
|
Weight |
About 180KG |
About 200KG |
About 220KG |
|
|
The width, depth and height are approximately（mm） |
600*654*940 |
670*600*1500 |
||
|
1 |
Ambient temperature 0℃～40℃ |
|
2 |
Ambient humidity < 80% (no condensation allowed) |
|
3 |
Factory height (column top height): 2.5m |
|
4 |
Ground load:> 1 ton/m2 |
|
5 |
Size of transportation door for factory equipment: width 1500 x 2000mm high |
|
6 |
No dust, no oil fumes, no salt, no dripping water |
|
7 |
Avoid direct sunlight exposure |
|
8 |
No flammable or corrosive liquids or gases |
|
9 |
No impact or high-frequency vibration |
|
10 |
Usage location: Workshop open environment |