1. A special instrument designed based on the Hall effect principle to measure DC and pulse magnetic induction intensity.
2. 4PCS probes can be connected for detection at the same time.
3. It is one of the most widely used measuring instruments in the field of magnetic measurement.
4. It has the advantages of high precision, good stability and high-speed measurement.
5. Equipped with the maximum value ( Max. ) function, it can accurately record the maximum value that occurs during the measurement process.
6. Equipped with a variety of communication interfaces, such as Ethernet/RS-232/RS-485/USB optional, Ethernet as standard.
① Test mode: including encoder mode, trigger mode and peak mode. Touch to switch the mode.
② Range display: including 100mT, 1T, 10T. Touch to switch the range.
③ The current measured value is displayed, with the N pole in red and the S pole in blue.
④ Unit display: Display contents include Gs, kGs, mT, T, touch to switch units:
Power supply | AC : 100V~ 2 3 0V, 50/60Hz; F USE: 1A | ||
Power | ＜ 5W | ||
Range | 0~1 0 T | ||
Number of channels | 4 | ||
Range gear | 0 . 1 T | 1T | 1 0 T |
Resolution | 0 . 01 mT | 0 . 1 mT | 1mT |
Accuracy | ±(0.5 % of reading + 0.05 % of full scale ) (calibration 0 ~ 2T range) | ||
Display digits | 4 -digit | ||
Display content | Current value, polarity, unit, range, test mode | ||
Display units | Gauss (Gs), Kilogauss (KG s ), Tesla (T), Millitesla (m T ) | ||
Communication interface | Ethernet/RS-232/RS-485/USB optional, Ethernet as standard | ||
Test functionality | Peak mode/Encoder mode/Trigger mode | ||
size | Length 304 mm x Width 2 29 mm x Height 1 36 mm | ||
weight | Approx. 5 kg | ||
1 | Ambient temperature: 0℃～40℃; |
2 | Ambient humidity: 0 %~90% without condensation ; |
3 | No dust, no oil smoke, no salt, no dripping water; |
4 | Avoid direct sunlight; |
5 | No flammable, corrosive liquids and gases; |
6 | No shock and high-frequency vibration; |
